AustriaDeutsch
BelgiqueFrançais
DenmarkEnglish
FranceFrançais
IrelandEnglish
ItalyEnglish
LuxembourgFrançais
NederlandNederlands
MonacoFrançais
PortugalEnglish
SpainEnglish
SwissFrançais
United kingdomEnglish
Wood protector for garden houses | Tikkurila Valtti Vinha
Valtti Vinha offers the perfect protection, is moisture-regulating, has extremely good adhesive properties and is very elastic. Beautifully opaque finish but leaves the woodgrain visible.
Suitable for all Ticra products made of Thermowood and Nordic Pinewood. You can add the colour code that you want to use to your order. View the colour chart.
- (€ 0,00)
€ 0,00
Opaque semi-matte alkyd acrylate woodstain for use on wooden surfaces both new and previously treated with Valtti Vinha or a transparent finish. Also suitable for surfaces that have already been primed. Protects the wood from the elements. Extremely good adhesion, low maintenance for up to 10 years. Very good elasticity, meaning it copes with the natural expansion and contraction of the wood. Will not crack or flake off. Moisture-regulating (allows moisture to escape from the wood but not enter it).
Suitable for all Ticra products made of Thermowood and Nordic Pinewood. You can add the colour code that you want to use to your order. View the colour chart.
Prior to painting and for annual maintenance, we recommend Finncleaner. As a primer, we recommend the Valtti Primer.
Use:
Walls, frames, doors, logs, fencing, cladding, cornices, sheds, etc. Not suitable for flooring. For both sawn and planed wood and impregnated wood.
Preparation:
Surface must be clean, dry, free of dirt, grease, oil and wax. Temperature > 5ºC. Humidity < 80% Start by washing down with Finncleaner or Super Clean, with Mould Removal if mould is present, in line with instructions for use. Rinse with water, allow to dry. Remove all loose parts and gently sand. Treat new and bare wood with Valtti Base first. Treat knots in the wood with Valtti Knotting to discolouration. Treat nail heads with Rostex Metal Primer. Sand glossy surfaces until matte prior to treatment.
Instructions for use:
Prior to use, stir well, apply 2 coats to new surfaces to be treated, 1 or 2 coats for maintenance depending on surface condition. 2 to 3 coats for impregnated wood. Apply amply to rough parts.
Opacity: Planed wood 8-10 m2/ltr. Roughly sawn wood 4-6 m2/ltr. Opacity also depends on substrate, porosity, humidity. Drying time: At approx. 23 ºC and 50% humidity, dry after 1 hour.
Can be painted over after 2-4 hours. Cleaning tools and diluting: Water
Related products
€ 67,95
€ 28,95
€ 51,95
€ 75,00
€ 43,95
€ 40,00
Reviews over Ticra
Onze ervaring met het leveren en installeren van onze sauna was erg goed. Helaas ging de led verlichting na een paar maanden kapot, maar dit werd prima opgepakt. Duidelijke communicatie, nakomen van afspraken en goede reparatie. Dit is de reden dat wij voor Ticra gekozen hebben en ze maken het waar!
~ Karin Poel
Prima geholpen en levering uitstekend gegaan. Blij met het product!
~ Fer Dreessen
Prachtige hottub gekocht. Super goede ervaring.Pluspunten: Super bedrijf. Klant vriendelijk. Behulpzaam.
~ Roger Kloprogge
Heel erg blij met het resultaat, heel mooie afwerking. Pluspunten: Vriendelijke ontvangst en communicatie. Heel mooie producten in afwerking. Kwaliteit, de tijd zal het leren, maar het voelt heel goed aan.
~ Frank Koelma
Bezoek onze showroom!
Je bent van harte welkom in onze belevenis-showroom in Dronten of Maastricht om nog meer inspiratie op te doen en onze verkoopadviseurs naar advies op maat te vragen.
